The quality of tap water leaves much to be desired, therefore it is undesirable to eat it, it must be subjected to additional purification. Water coming from the tap often has an extraneous taste and smell - this can greatly ruin the dish, and drinking it can be completely disgusting. Largely for this reason, many people install special filters under the sink, eliminating additional impurities from the water that spoil its quality.
They remove harmful substances from the water, including heavy metals, chlorine, large impurities such as squeak. These designs are installed directly in the kitchen sink, due to which clean water will be obtained instantly, in contrast to the jug type filters.
Summary of the rating:
What are the criteria for choosing a flow filter for washing?
Before deciding on the purchase of a filter element, it is necessary to find out the chemical composition of the water flowing from the tap. Due to this, it will be possible to select products that will purify water very effectively. For example, if tap water is too hard, a filter equipped with a membrane is best suited - the so-called reverse osmosis, which is quite expensive. Hard water should be cleaned if people with kidney diseases live in the apartment. For less hard water, an ion exchange filter will be sufficient.
When purchasing a filter for washing, in addition to cost, you should pay attention to a number of other components - cleaning technology and whether it has a softener:
- Membrane filtration is able to completely clean tap water from bacteria and viruses. Only clean water will be filtered through such a filter, devoid of any impurities. However, there is a certain minus - useful minerals are removed along with bacteria, so such water will not bring any harm or benefit. Installing a filter with a built-in mineralizer can cope with this problem;
- To clean hard water from heavy metals in budget filtering systems, only ion exchange is used. It will purify water quite acceptable, although not as subtly as reverse osmosis.
A water softener is one of the most useful functions, which reduces the proportion of calcium and magnesium salts, respectively, this will reduce the formation of scale in the kettle. Another important addition will be coal filtration, which contributes to the absorption of chlorine, phenol, benzene, toluene, various kinds of petroleum products and pesticides that may be contained in water. Such a function is quite simple and is even in the cheapest designs.
We tried to make the most detailed rating of filters for flowing water, and we were based not only on the recommendations of experts, but also on popularity according to user reviews. A very important role in the formation of our top-10 rating was played by the price-quality ratio of products. We hope that the review will be quite useful.
The best models of water filters in 2019
10+. Akvafor OSMO 50 execution 5
This model quite effectively softens water and removes its turbidity.At manufacture, an original semipermeable membrane is installed in the filter, which is supplemented by special carbon modules. This allows you to remove all dangerous impurities from the water, the size of which is at least 0.0005 microns - these include chlorine compounds, rust, pesticides, nitrates, heavy metals. Purified water acquires a pleasant taste, becomes useful for the body, it is allowed to use it even for preparing baby food. The design provides for a storage tank with a capacity of about 10 liters and a carbon post-filter.
It can be used exclusively for cleaning cold water - its inlet temperature should be no more than +30 degrees. The device takes up little space, so it easily fits under the sink. A separate faucet leaves from it, about 1.3 liters of water can pass through the filter per minute. The filter has four degrees of purification: coarse, medium, fine and purification from chemical compounds.
Benefits:
- Very convenient during installation - it is enough to just connect it to the water supply system;
- High quality water at the exit;
- Significant resource of work;
- Compact overall dimensions.
Disadvantages:
- Water passes through it quite noisily;
- Not too much filtering speed;
- The crane is not too comfortable, you have to reach for it.
10. Geyser Prestige PM
This model is a rather original design with a high-pressure pump. Osmosis has three stages of water purification. At the first stage, the water flow passes through a special cartridge made of foamed polypropylene with a mesh size of 5 microns. Any insoluble particles in the water will be retained in it. At the second stage, water enters the carbon block, produced from coconut activated carbon, which neutralizes chlorine compounds and organic substances that are harmful to the human body. With its help, the taste and smell of water improves. In the third stage, water passes through the SHS cartridge, also made of pressed carbon carbon, which removes residual chlorine and other chemicals from the water.
A storage tank with a capacity of 12 liters is provided, which allows you to always have a small supply of clean water. The design has a mineralizer that restores the chemical composition of moisture that is most suitable for the human body.
Benefits:
- Superior water quality
- The presence of a small tank;
- Filter reliability.
Disadvantages:
- The filter cover is not too reliable - there is a possibility of flooding;
- Due to the small size of the filters they clog in a matter of weeks;
- The membrane body is also not too durable.
9. Atoll A-550 STD
This model is characterized by excellent workmanship - it has a durable and dense plastic case equipped with several stiffeners, which make the structure quite reliable. Immediately after connecting this filter, water can be consumed as food, it will have no extraneous odors and tastes. It looks quite attractive. The ball-type valve rotates smoothly and gently.
The first cleaning step is immediately at the water inlet. The cartridge here is quite dense, hard. In the second stage, water passes through the coal segment, which can be replaced if necessary. Water enters here through a special distributor, which ensures its uniform seepage. One such cartridge is enough to completely eliminate about 19 tons of water from chlorine. At the third stage there is a cartridge, which excludes any chemical residues from entering the tap, it is quite rigid, so there is no likelihood of its deformation during use.
Benefits:
- Allows you to get a large amount of clean water per unit time;
- Standard form with reinforced housing;
- Ceramic ball valve, durable.
Disadvantages:
- High price;
- Represented by no means in all stores;
- The overall design does not fit under every sink.
8. Barrier EXPERT Standard
This is one of the best household filters produced by osmosis technology. Perfect for cleaning tap water from any mechanical impurities and chemicals. It uses multi-stage filtration technology, which has proven itself in many similar designs. This system has three main modules: mechanical purification of water from various contaminants, with its help it is possible to get rid of sand, rust and other large and small particles. The second module saturates water with useful ions, removes chlorine, lead and copper compounds from it. The third uses PostCarbon, which removes organic matter from the composition.
Such a filter can be installed both under the sink and directly on it. In the kit is everything you need to run, you do not have to purchase anything else. It can be used around the clock. The connection is quite simple - anyone can handle it. In order for the filter to begin to work fully, the first ten liters of water must be drained, only after that it can be used for its intended purpose. All cartridges are replaceable, as they become dirty they will have to be replaced.
Benefits:
- It is convenient to change consumables;
- For a filter of this type, the cost is quite reasonable .;
- Beautiful appearance, allowing the use of this design, including at the sink.
Disadvantages:
- You should carefully monitor the condition of the filter elements, otherwise there will be a very high proportion of contaminants in the water passing through them;
- Sometimes it does not cope with its task, while maintaining water hardness at the same level.
7. Geyser Nanotek
This is one of the best osmosis filters designed for installation under the sink. It takes up a lot of free usable space due to the presence of a capacious water tank with a volume of about 20 liters. This model qualitatively filters water through a five-stage purification system, designed for direct connection to the water supply. With it, you can significantly reduce the concentration of iron, reduce hardness and completely get rid of chlorine.
A smart system passes healthy minerals and delays those that can have a harmful effect on the human body. If you use this system correctly and change cartridges as necessary, you will be able to drink absolutely pure water for a long time without any poisonous impurities. The design performance is about one and a half liters per minute, which is quite enough when cooking.
Benefits:
- Very soft water without impurities;
- Pretty good assembly of the entire structure, reliable protection against any leaks;
- Connecting is pretty simple.
Disadvantages:
- Most likely you will have to purchase a pressure gauge to measure the water pressure in the water supply system (if it is below three atmospheres, the filter simply will not be able to function);
- High price;
- It is not so easy to find replaceable cartridges.
6. Aquaphor Crystal Eco
This design is very easy to install, the installation method is no different from connecting an ordinary kitchen faucet. However, you will have to be quite careful here, since the connecting pipes going to and from the collector block must be connected in the correct position. Be sure to remove the filter cover. After connecting all the modules, they will have to be washed for some time with tap water so that all filter elements begin to function normally. This design belongs to ionic cleaning systems, does not take up much space under the sink, and copes well with both mechanical and chemical contaminants.
If necessary, you can install an additional module for water softening, but it will have to be purchased separately.The manufacturer recommends replacing the filter cartridges approximately once a year, and the softening element is even more common, approximately every seven to eight months. The design can be attributed to universal, as there are a lot of types of filter elements.
Benefits:
- Three standard modules in the kit, you can install additional items;
- The housing of all filters is plastic, equipped with stiffeners;
- Very easy to install and operate.
Disadvantages:
- As the cartridge wears, the taste of water may change;
- Gradually the filters become clogged, due to which the yield of filtered water decreases;
- The locking mechanism in the tap may leak, which may lead to deterioration of the washing.
5. Aquaphor Morion M
This is one of the best models of water filters for washing, which uses reverse osmosis technology. If desired, the device can be installed not only under the sink itself, but also on it or in the immediate vicinity. This filter looks very stylish. The design of the cartridges is made in a block-modular type. Their body additionally has stiffeners. The storage tank is built-in, it has a small volume, so the dimensions of the filter are quite acceptable.
Other designs will only function at a sufficiently high pressure of water in the central system, this filter is also tied to pressure, but only one and a half atmospheres are enough here. In addition, such a moment can significantly save water. The useful volume of the built-in tank is 5 liters of purified water. The output reaches one and a half to two liters per minute.
Benefits:
- It produces water with medium hardness;
- There are no extraneous odors and unnecessary impurities;
- The kettle does not form scale.
Disadvantages:
- High price of replaceable elements;
- Quite a lot of noise during operation;
- In general, the level of strength is poor.
4. Barrier EXPERT Hard
This model rightfully takes the fourth place in our review of the best water filters this year. We put it in third place largely due to the most delicate mechanical cleaning among other models - filters remove particles from 5 microns in size from water. In the process of manufacturing the construction, special Smart Lock technology was used, which allows the filter to remain in its place even under strong water pressure. In addition, the byPass technique is used, which can significantly extend the life of the filter element - it will be necessary to change it less often, and it will also be a good preventive measure to soften the passing water too much. This filter is designed exclusively for central water supply.
Complete with a filter is everything you need for its proper installation. Maximum capacity can reach 2 liters per minute. Moreover, due to the crane at the inlet to the filter, this figure can be reduced. The resource of one cartridge is 10 thousand liters, after which it will need to be changed. The highest inlet pressure should be no more than 7 atmospheres.
Benefits:
- Long cartridge life;
- Cartridges change very simply;
- It softens and purifies water very well;
- Water becomes tasty and harmless to health.
Disadvantages:
- Cartridge resource is lower in comparison with the declared manufacturer;
- The ball valve at the inlet to the filter is not reliable.
3. New Water Expert Osmos MO530
This model is one of the latest on the market today. It belongs to the premium class, which is why it is quite expensive. Its useful qualities are at a very high level - with the help of this filter you can get rid of 99.9% of harmful impurities. The design easily removes particles up to 5 microns in size, removes organic compounds, pesticides, herbicides and other harmful compounds.
Here four types of cartridges are used for cleaning at once - the standard one, designed for mechanical cleaning, eliminating water from suspensions of various substances.Next is a carbon filter, which is made from activated coconut carbon. The next stage is the reverse osmosis membrane made in Japan; it is much more effective than similar parts in the above models. After it there is another carbon filter, where activated carbon is in the granules, as well as minerals that enrich the water with useful trace elements and minerals. Durable filter elements - they can last about 2-3 years without the need for replacement.
Benefits:
- For a reverse osmosis system, it takes up really little space;
- High build quality;
- Durability;
- Long cartridge life.
Disadvantages:
- Price.
2. ECO Geyser
This is the most efficient filter among all the models presented in our review, moreover, it does not take up too much space under the sink and does not require complicated installation and frequent cartridge replacement. With all its positive qualities, it does not cost too much. With its help, you can completely rid water of chlorine, various derivatives of oil and a number of other poisonous and simply harmful impurities.
Despite the high performance in terms of water filtration, it does not cost too much. It has the latest modification of the Aragon 3 ECO cartridge. With its help, mechanical and sorption purification of water is provided, it is also enriched with ions. Filter replacement is rarely required.
Benefits:
- Compact overall dimensions - can fit even under a small sink;
- Perfectly purifies water;
- The cartridge is enough for 4-5 tons of water;
- Easy to install.
Disadvantages:
- Not found.
1. IKAR
The IKAR filter is today recognized as the best filter for water purification. It produces the highest quality water. This filter not only purifies water in the best way, but also improves its performance. The output produces mineralized “living” water with negative ORP. The IKAR filter consists of two main components: a reverse osmosis filter (premium - 5 stages of filtration), an IKAR module (ionizer and water mineralizer). It is possible to additionally connect an ICAR ph reactor, which increases the pH, to the installation. The installation is automated and has a microprocessor control unit and monitor the parameters of water and the quality of its treatment.
The IKAR filter is installed under the sink in the kitchen. Despite the high cost of installation in comparison with other filters, the cost of water, which is comparable to the water from Lake Baikal in its characteristics, is 2 p. per liter. Filters have been commercially available for sale since 1997. The unit has received several prestigious international awards. The largest official dealer of IKAR water treatment plants is home-spring.rf (delivery in Russia is free, installation service, discount system).
Benefits:
- The highest degree of water purification;
- Large installation life - 1,000,000 liters;
- Replaceable cartridges are sold in any store;
- Electronic control of all parameters of water purification, mineralization and ionization.
Disadvantages:
- Not found.
In conclusion, a useful video
As can be seen from the review, most stationary water filters are very similar in their structure and functions, however, some are better cleaned of mechanical impurities, others eliminate chloride compounds. In order to purchase the most suitable products, it is advisable to pre-analyze tap water. Regarding whether you liked our review and whether it turned out to be useful to you, you can comment on this article.
Thank you for the article.
That's it, thanks for the prices ...
We finally stopped at the Akvaforovsky osmosis "Morion" - the drainage is small, it works without a pump at low pressure and takes up no more space due to the built-in tank, by the way a water tank, and not a water-air one like standard ones.
Well, of course, the most expensive is the best who would doubt it.