Solid fuel boilers designed for heating a private house are a very effective solution in certain conditions. Electric heating is associated with high costs if it is necessary to heat a significant area, gas devices in this regard are more economical, but it is far from always possible to provide the house with appropriate fuel. As fuel for solid fuel boilers, firewood, coal and other similar materials are used.
On the market today there is a wide selection of models of such units of various kinds: long burning, pellet, traditional, pyrolysis and so on. To make the right choice in such conditions is not so easy as it might seem at first glance. We tried to make this task as easy as possible for you and ranked the top 10 best boilers. When compiling it, a large number of such devices were analyzed, we were based on the feedback of users and specialists, compared the price-quality ratio.
Summary of the rating:
Ten best models of solid fuel boilers
10+. ZOTA Pellet 100A
This is a pellet type boiler, which is characterized by a high level of process automation, when the device is able to function for several days without additional refueling with combustible materials. The design provides for screw fuel supply and the presence of an inflatable fan, it is perfect for harsh Russian climatic conditions. The maximum power of the equipment is 100 kW, the volume of the hopper for fuel is 606 liters. Due to the screw feed, absolute protection against overheating is provided, it also prevents the penetration of flame into the fuel storage hopper.
The built-in thermostat sends the device to standby mode when the required temperature is reached. The boiler is connected to the electric network, from which all automation functions, it has an automatic ignition. The main parameters are adjusted using the buttons located on the device. Automation allows you to keep full control of the daily fuel consumption, making the boiler more efficient and economical. Additionally, you can install a GSM-module that allows you to remotely control the temperature in the system. The unit is able to heat a building with an area of up to 800 square meters.
Benefits:
- Screw fuel supply;
- The presence of an electronic control system for all elements;
- High power;
- High efficiency - about 90%.
Disadvantages:
- The need to connect to the mains;
- Significant mass of the device.
10. ACV TKAN 100
A fully automated device that uses coal, wood braces, firewood and so on as fuel. It has a high efficiency - about 93%, fuel consumption is small - from 8 kg per hour when setting the boiler to maximum performance. The boiler is absolutely safe during operation thanks to its fully sealed combustion chamber and forced air supply. The fuel supply is equipped with a fire damper.
The convective part is equipped with a pneumatic cleaning system, for the convenience of using solid fuel there are special grilles. The maximum heated area is 300 square meters. m. The highest pressure in the heating system is 3 bar. The device is equipped with automation, powered by electricity, so the boiler needs to be connected to the network, the burner ignites on its own. The basic settings are set at the expense of a special remote control located on the unit body.
Benefits:
- Not the biggest mass of the product;
- High rated power and efficiency;
- The presence of electronic automation, ensuring safe operation and compliance with all set modes;
- Fuel is supplied by a screw mechanism.
Disadvantages:
- High price.
9. ZOTA Poplar M 20
The boiler is highly reliable and has a very attractive design solution. The fuel loading is vertical, an automatic type traction regulator is provided, there is a gas burner connected directly to the household gas pipeline or to the cylinder, there is a reliable heating element.
The maximum heated area is 150 square meters with a ceiling height of 3 meters. In the heating system, the highest pressure is 3 atmospheres, its volume is designed for 54 liters. The case has good thermal insulation. Under the decorative casing is a water jacket that prevents the boiler from overheating, it is additionally covered with basalt cardboard, due to which heat losses become minimal. The furnace door is equipped with a lock, one load of fuel burns out for about 12 hours. The boiler must be connected to a natural chimney, since there is no fan in its design.
Benefits:
- The burner is economical, due to which the fuel consumption is reduced, and the thermal power increases;
- Management autonomous;
- The ability to use several varieties of solid fuel;
- Significant performance indicators - over 90%;
- Reliable assembly;
Disadvantages:
- Great weight.
8. Wirbel BIO-TEC 35
This device is a pyrolysis type, its power range is from 18 to 80 kW. The boiler is designed to burn wood or wood waste. It is well suited for small or medium sized rooms. The pyrolysis type technology provides complete fuel combustion. The camera is quite spacious - there will fit firewood up to half a meter long. One load completely burns out within five hours at the standard power of the device, during the economy mode it can burn throughout the day.
The unit retains the heat of about 12 hours, during which there is no need for re-ignition. All equipment functions are controlled by a special regulator. The boiler is connected to the heating system of the house due to the thermostatic three-way valve and the storage tank. When loading, make sure that the fuel is dry - it should have no more than 25% moisture. There is practically no burning waste in the boiler, due to which it does not need frequent cleaning - with a maximum load it needs to be cleaned on average once a week. Flue gases are also burned, due to the high efficiency of the equipment (about 92%) and good environmental performance. Boilers are completely safe when used properly.
Benefits:
- High power level;
- Both the fuel itself and the exhaust gases are burned;
- The device is equipped with a control panel;
- All processes take place fully automatically.
Disadvantages:
- If the console breaks, then the user loses the ability to control processes;
- Expensive equipment.
7. Wattek PYROTEK 36
This boiler provides continuous burning in the furnace, capable of maintaining a comfortable temperature in the house for a long time. When fully charged, fuel combustion occurs within 12 hours. The thickness of the walls of the furnace is 5 mm, the heat exchanger is made of copper, no scale is formed in it.The boiler dampers do not need to be adjusted initially. The boiler automation is electric, has a significant number of functions, has a number of operating modes - standard, summer, hot water, priority of hot water.
On the control panel, you can program the temperature for turning the pump on and off. With its help, weekly programming of the boiler is also carried out. The remote control menu is completely Russified. The boiler operates by pyrolysis technology, for the removal of combustion products there is a 10-speed fan, the adjustment of which is automatic. The unit is made in strict accordance with all existing quality standards.
Benefits:
- All modes and temperature indicators are automatically adjusted;
- To ensure additional safety, the boiler is equipped with emergency, boiler and boiler sensors;
- Conventional firewood in a firebox burns out within 12 hours, when using briquettes this indicator increases to 15-17 hours;
- High-quality assembly;
- The possibility of using a boiler to create a hot water system.
Disadvantages:
- The high cost of maintenance, repair and spare parts.
6. EVAN WARMOS TT-18
This boiler can be used not only for residential, but also for industrial or agricultural premises. It can be used as a primary or secondary heating equipment. The main rule is that it should be in a room equipped with a natural ventilation system. For higher efficiency, the device is equipped with a flue gas combustion system.
The design has a ten and a reliable traction control system. The main function of PETN is to maintain the water temperature to prevent defrosting of the heating system. The unit operates on the basis of the natural circulation of water due to the temperature difference, however, the pipes will need to be positioned so that the coolant can pass through the system independently. If it cannot be ensured, then it is necessary to additionally install a circulation pump and an expansion tank that has direct contact with atmospheric air. The maximum pressure at which this boiler can operate is 5 bar. The unit is designed for an area of up to 120 square meters.
Benefits:
- Easy to install;
- Reliable build quality
- The ability to use any solid fuel.
Disadvantages:
- The position of the shutter must be manually adjusted to prevent excessive fuel consumption;
- Fast burnout of fuel.
5. Lemax Forward-16
It is a fairly simple device, where nothing more is provided. The design is very reliable, does not require maintenance, has an affordable price. The case is made of decorative metal panels. Behind it lies a layer of thermal insulation, under which there is a body of low carbon steel 4 mm thick. The fuel chamber is large, it is protected from overheating by a water jacket.
To increase the strength of the equipment, the heat exchanger is reinforced with a channel, so that the probability of rupture is low. At the bottom of the device is a heat-resistant grate, under it there is a box for slag and ash. You can remove it through the door on the front panel, it also acts as a damper that regulates the amount of air entering the combustion chamber from the room. The pipes through which the supply and return lines of the heating system are connected are located on the rear panel. There is also a chimney nozzle with a draft control valve. The boiler can work on wood or on brown coal, for convenience there is a top fuel loading system.
Benefits:
- The possibility of using any type of solid fuel - coal, coke, firewood and so on;
- Small overall dimensions, there is no need for constant maintenance;
- Convenient top or end loading;
- Low cost.
Disadvantages:
- Low efficiency;
- The need to regularly load fuel, as it burns out quickly enough.
4. NMK Magnum KDG 20 TE
The first device in our ranking of the best solid fuel boilers, equipped with a long burning system. It is perfect for heating a house or industrial premises, the area of which is about 150 square meters.
This unit is Russian-made, designed specifically for harsh domestic climatic conditions. Only coal is used as fuel - it can burn out within four to five days, the efficiency of this equipment is about 80%. The case is reliable, the unit does not require additional maintenance. The fuel combustion control system is quite simple, but at the same time, it is very reliable - it almost never fails.
Benefits:
- Favorable cost;
- Superior workmanship;
- There is a heating adjustment system.
Disadvantages:
- The air damper must be in a certain position, which is not too easy to set.
3. Teplodar Kupper OK 15
In the top of solid fuel boilers, this unit is in an honorable third place, largely due to the long burning of fuel. So, on one tab of firewood the equipment can work for about 30 hours, briquettes burn out in two days, coal about 5 days. Perfect for residential, warehouse and even industrial premises, the area of which does not exceed 150 square meters.
As a coolant, you can use both water and antifreeze, any solid fuel - briquettes, firewood, coal - acts as a fuel. When installing additional elements, the boiler will operate on electricity or gas. The heat exchanger is made of 12 tubes, which ensures high efficiency of the device. The door is sealed, due to which smoke will not pass into the room, and the fuel will burn much longer due to poor access of oxygen to the furnace - it is based on the state standard GOST 9817-95.
Benefits:
- High build quality of the device;
- Profitability of work with significant efficiency;
- Excellent value for money.
Disadvantages:
- Considerable mass, which is why the boiler is difficult to rearrange from one place to another.
2. Solid fuel boiler Week “KO-90”
Heats rooms 150 - 400 sq.m. Ideal for a private house, cottage, car service, as well as a car wash.
On one load of 300 liters it can work up to 7 days. Operating power: 15−45 kW (regulated by automation). Peak Power: 90 kW
Benefits:
- Mass production;
- Made of 5 mm Russian steel grade 09G2S manufactured by MMK;
- The hatch for cleaning the heat exchanger can be located both on the left and on the right;
- All stages of production are controlled;
- The insured liability to the consumer in ROSGOSSTRAH in the amount of 10 million rubles;
- Patented manufacturing technology;
- Availability of documentation confirming fire safety, reliability in use.
Disadvantages:
- Weight and dimensions, but this makes the boiler reliable, with good one-time loading;
- The presence of condensate may seem like a minus, but this is an indicator of the high efficiency of the boiler, and there are effective ways to reduce it;
- Volatility. Undoubtedly a minus, but easily fixed, by solving which the house always gets warm, regardless of whether there is electricity or not.
You can buy boilers Nedelka here.
1. Buderus Logano G221-25
It uses any solid fuel - for its loading there is a capacious combustion chamber and a convenient loading door. It is possible to adjust the temperature of the coolant. The boiler is very convenient for systems with a natural water circulation system, however, it can be used in structures equipped with a circulation pump.
The maximum power of the unit is 25 kW, the largest heated area is about 250 square meters.The boiler is used as the main or backup source of heat supply. The heat exchanger is made of cast iron, its average life is about 30 years, due to which the heat carrier can be heated to a temperature of 90 degrees. The efficiency of the device is 78%, it is completely non-volatile. We can say with confidence that this is the best solid fuel boiler for a private house.
Benefits:
- A large volume of the furnace, where you can put firewood up to 68 cm in size;
- Attractive appearance and high-quality assembly;
- Good energy efficiency;
- Easy to install, operate and maintain.
Disadvantages:
- High price.
In the video, how to choose a solid fuel boiler for a private house?
As you can see, we considered in the ranking both expensive and rather cheap designs of solid fuel boilers, which is called on any wallet. We hope that the top 10 of these devices will help you decide on the appropriate unit. You can share your impressions of the review as a whole or of the specific models presented in it in the comments.
(2 ratings, average: 5,00 out of 5)
Loading...
