TOP-12 of the best electric water heaters

It is impossible to do without hot water in an apartment or in a house. If the central water supply is not able to provide it throughout the year, then it makes sense to purchase a water heater. These devices are of flowing or storage type, operating on electricity or gas. Instantaneous water heater has several advantages:

• Water heats up instantly;
• The device is small;
• The volume of water depends entirely on the needs of the consumer.

This design is best suited for small apartments, where household appliances occupy a minimum amount of free space. Such water heaters consume a lot of resources. Storage water heaters in this regard are much more economical. Our top 10 ranking shows the best electric water heaters of various types. When compiling it, we took into account not only the characteristics declared by the manufacturer, but also the opinions of users. We hope that our rating will help you choose the most suitable design, which will have a good price-quality ratio and give out the required amount of water.

Top 10 Good Water Heater Models

10. Timberk WHEL-7 OC

This is one of the most compact models presented in this rating. The water heater is equipped with a streamlined and completely protected casing. With it, you can fully provide water to one point of consumption.

This is a flow-type device, the heating element is made of copper coated with protective agents, which allows to extend its service life. It is also equipped with a hydraulic type valve, which has a shutdown sensor. It fires when the water is turned off. The flask is made of thermoplastic having stiffeners and thickened walls.

Benefits:

• Heats water quickly to the required temperature;
• Flowing;
• It has compact overall dimensions;
• It is convenient in operation;
• Simple settings system;
• Low cost.

Disadvantages:

• Heating elements need to be replaced after three years of service - this is their declared resource.

9. Electrolux NPX6 Aquatronic Digital

This is one of the widespread models of instantaneous water heaters. It has good performance - it can produce about 3 liters of hot water per minute, and consumes a small amount of electricity - only 5.7 kW. In its class, this is one of the most economical indicators. By production, high-quality materials are used, which ensures a long period of operation of the device. The design can distribute water to several points. The control system is electronic type, quite convenient. It has several temperature setting modes.

For added convenience, this unit is additionally equipped with a digital display. Water is supplied from above, which is far from always convenient when connecting, especially if the pipes fit from below. The water heater works efficiently - it gives out hot water of the right temperature at any pressure, it has small overall dimensions.

Benefits:

• Small dimensions;
• The presence of a digital display;
• Rapid heating of water to specified parameters;
• Convenience in management - just set the temperature, during operation there is no need to adjust the pressure;
• Small dimensions;
• Reasonable cost.

Disadvantages:

• Power is not enough to heat water to a high temperature;
• Needs a separate line from the electrical panel;
• It happens that the automatic inclusion system does not work, you have to start it with the button.

8. AEG RMC 75

It has excellent value for money. This is one of the best instantaneous water heaters, which is able to provide one water intake point with hot water up to 60 degrees. The dimensions are compact, the weight is only 2 kg. The boiler’s productivity is 4 liters per minute, which will be enough both for washing dishes and for taking a shower and even a bath. Adjusting the temperature is quite simple - this is done using a special display.

The power of the device is 7.5 kW, so for its installation you will have to lay a separate line, the design provides protection against overheating. It is allowed to be integrated into the water supply system if the pressure in it does not exceed 10 bar. The temperature is maintained in a predetermined mode by means of a microprocessor unit equipped with an electronic sensor that changes the power of the heating element. The last indicator depends on the volume of water entering the device. The design provides protection against overheating, there is an automatic shutdown system. It is equipped with two heating elements installed in copper flasks, making work efficiency as high as possible.

Benefits:

• Due to the small mass, it is easily mounted on the wall;
• Gives a decent amount of hot water;
• Automatically shuts off when the water supply stops;
• In the process, it practically does not lose the pressure of the system - the decrease is only 5-10%;
• The setup is simple.

Disadvantages:

• There is no power cable in the kit - you need to purchase and install it yourself;
• The case is not sealed, water vapor can pass under it.

7. Hyundai H-SWE1-50V-UI066

It has a very high-quality storage tank, which is internally covered with a double layer of enamel, which excludes the occurrence of scale and other deposits. Dry type heating element, which is not in direct contact with water, 3 year warranty. The device is equipped with comprehensive leakage protection, there are sensors that prevent the occurrence of excessive pressure inside the storage tank. The outer casing is made of steel, painted with a white matte paint. As thermal insulation, foamed polyurethane is used, which perfectly maintains the temperature of the water, reducing energy consumption. The water heater is small in size and light in weight, mounted vertically, so it takes up little free space.

Benefits:

• Robust construction;
• Low cost;
• Bottom water connection for easy connection;
• The presence of a power indicator;
• It consumes only 1.5 kW of energy;
• Simple work interface.

Disadvantages:

• Slow heating of water due to low power;
• It works poorly in a system with high water pressure.

6. Oasis VC-80L

This accumulative type device is designed specifically for several water points. It can be used both in the absence of hot water, and with its temporary shutdown. TEN is made of a copper alloy, it is able not only to heat water to the required temperature, but also to maintain it to the required level.

The inside of the tank is covered with sapphire-enamel compounds that extend its life. Between the tank and the body is a heat-insulating layer of polyurethane foam. There is a temperature sensor in the tank, it will also turn off the device when it overheats.

Benefits:

• The inner surface of the tank is covered with two layers of corrosion protection;
• Water temperature even without heating can be stored for up to 48 hours;
• The low power of the device does not imply the laying of a separate line;
• The thermostat provides high-quality protection against overheating;
• The internal tank is covered by a 5-year warranty.

Disadvantages:

• Weak TEN;
• Water heats up too long;
• The electronics are unreliable - sometimes the temperature sensor fails.

5. Ariston ABS PRO R 120 V

This is the most capacious model that fell into this review - you can add up to 120 liters of water to it, however, it got into this rating not only for this reason. The device is designed for several water outlets at once. The maximum temperature of water heating is 75 degrees, the power is 1.8 kW. The model is installed only in an upright position. The device is controlled mechanically, the temperature adjustment is convenient. The security system is reliable, a protective shutdown system is provided.

Benefits:

• A device for softening water, which prevents the occurrence of scale, limescale;
• Polyurethane thermal insulation;
• Water is competently distributed in the tank, allowing hot water to be dispensed first;
• Attractive design
• Overheating protection is provided;
• There is a safety valve;
• Warranty period of operation of 7 years.

Disadvantages:

• The back pressure valve begins to leak after about 6-7 years of service.

4. Electrolux EWH 50 Royal Silver

This water heater has an interesting design appearance - the body is painted in silver color, has a flattened shape, so it can be installed in a small niche, where it almost does not take up free space. It is fixed directly to the wall, the supply pipe is lower. The tank can accommodate up to 50 liters of water. The heater has a power of 2 kW, in addition, a magnesium anode is located in the tank, which will reliably protect the device from scale. A safety valve is supplied with the boiler, as the product is designed for a maximum pressure of 7 atmospheres in the system. The design has two power modes, the heating temperature is selected using a small rotary controller.

Benefits:

• It works absolutely silently;
• It features a beautiful appearance;
• Quickly heats water to a predetermined temperature;
• The economy mode is provided;
• There is a residual current device.

Disadvantages:

• Automation sometimes does not work;
• The tank does not hold the temperature too well, which is why the heater turns on quite often.

3. Thermex Praktik IRP 100 V

It is rightfully located on the third line of the best storage water heaters of 2019. It is equipped with a rounded case made of plastic that combines with metal. The heating tank itself is made of stainless steel with a special inner coating that extends its service life. Significant volume - 100 liters, maximum power - 2.5 kW. 3 power levels are provided at once. The highest water temperature is 74 degrees. A safety valve is included with the device, the boiler has protection against power surges, power outages, leaks, and so on.

Benefits:

• Reliable assembly; only high quality materials are used in the production;
• The case is made of impact-resistant plastic, it is insulated from the inside;
• The temperature is regulated smoothly and long maintained at a given level;
• The buttons are equipped with a backlight;
• No noise during operation.

Disadvantages:

• It is necessary to fix it very securely on the wall surface, since in the filled state the heater will weigh a lot;
• Big sizes;
• The design does not include a display.

2. Electrolux EWH 100 Formax DL

This model in the ranking of the top 10 best water heaters is located in an honorable 2nd place, slightly inferior to the leader in its functional characteristics. The brand speaks for itself - the products manufactured by this Swedish company are characterized by ease of use and reliable performance.

The capacity of the tank is 100 liters, the maximum power is 2 kW, and it can be adjusted in order to save electricity.Inside the tank is enameled, made of stainless steel. You can install a water heater both horizontally and vertically. The device is equipped with two heating elements - the power of the first is 0.8 kW, the second - 1.2 kW. They both do not come into contact with water, if one of them fails, then this will not affect the operation of the water heater. The design provides an electronic panel that facilitates control.

Benefits:

• High capacity;
• The tank and housing are made of durable materials;
• As thermal insulation, foamed polyurethane is used;
• The inner surface of the tank is protected by a Protect Tank system, which includes the use of glass enamel and anodized magnesium;
• There is the possibility of accelerated heating of water;
• A protective shutdown device is installed on the power cable, which protects the water heater electronics from power surges.

Disadvantages:

• Continuous heating of water if accelerated heating is inactive;
• High price;
• Even without filling with water, it weighs a lot - 31 kg, which complicates the installation.

1. Zanussi ZWH / S 50 Symphony HD

This is one of the few designs that is equipped with a special valve to relieve excessive pressure. It is mounted on a cold water supply pipe in front of the tank itself. A tap from it is connected to the sewer. The device is placed vertically with the help of a rigid non-bending strap that can easily withstand the weight of both the heater itself and the water in the tank. It is quite easy to adjust the temperature of the device, the temperature regime is in the range from 30 to 75 degrees. The water heater is equipped with an economical mode, even when using it, literally an hour later you can get hot water. The model does not have a residual current circuit breaker, so ideally it should be connected on a separate line. The design is small in size, economical, it is covered by a 5-year warranty.

Benefits:

• The water tank is covered with finely dispersed enamel from the inside, which provides its reliable protection against rust;
• Easy to use at home;
• Attractive appearance;
• Reliability of assembly.

Disadvantages:

• The hot water supply pipe fails after approximately 5 years of service.

In conclusion, useful videos

The performance of the device directly depends on a number of parameters that must be considered when choosing. We tried to give useful recommendations that can help the user determine the most suitable model for him. As to whether they turned out to be really useful to you, you can express yourself in the comments to this article.

(6 ratings, average: 5,00 out of 5)

Loading...