Today, tool manufacturers are striving to make life easier for home craftsmen. If some 10 years ago people could not even dream of such a tool as a hammer drill, then at present it has become quite widespread both in industrial construction and at home. If earlier it took a lot of time and energy to make a hole of the required diameter in a concrete or brick wall, today the process, thanks to this device, takes only a few seconds and does not require much effort.
The issue of acquiring equipment must be approached responsibly and competently, otherwise it can be very disappointed in it. The nature of the work performed, their scale and a number of other important points should be taken into account. Therefore, we decided to start today's review on perforators with its main characteristics, based on which you can buy the best tool and not overpay for useless functions.
Summary of the rating:
Key rules for choosing a punch
The main advantage of a punch compared to an ordinary impact drill is the possibility of accented impact. Largely due to this feature of this tool, it is possible to quickly carry out various labor-intensive operations associated with the dismantling of partitions, walls, window or door blocks, removal of screed and so on.
In addition, a puncher will be very useful in cases where it is necessary to remove the old finish - ceramic tiles with adhesive holding it, a layer of plaster and so on. This tool is perfect for work related to making holes even in dense monolithic concrete, with other materials such as brick or wood, it will cope even faster. On sale there are special nozzles for a rotary hammer, with which you can make gates for electrical wiring, make holes in concrete for the subsequent installation of sockets or switches, pipe laying, manufacturing of a ventilation system, and so on.
When choosing this equipment, power is far from always a determining indicator, in contrast to other electrical equipment. Of course, attention should be paid to it, but it is not so great against the background of other qualitative characteristics. On average, such devices are available with power from 600 to 1200 watts. On sale you can find more professional models - up to 2000 watts. At home, the impact of the shock mechanism plays a key role.
In terms of rotation speed, the equipment also loses even with average drills, however, an excessively high number of revolutions is not required for a puncher - the optimal range is from 500 to 1500 revolutions per minute. The fact is that using a tool with a large number of revolutions will lead to the fact that the drills and other equipment will wear out too quickly. Adjusting the rotation speed does not hurt - the rotation speed can be adjusted depending on the equipment used and the type of material being drilled.
The performance of a tool is directly affected by impact energy and its frequency. For the first parameter, the average indicator is in the region of 1-2 J, professional models have indicators of the order of 10 J. The more hits there are per unit of time, the faster you will be able to achieve the desired result.
When compiling our ranking of the best punchers of 2019, we took into account all these points, and also took into account the price-quality ratio of the device, studied a lot of positive and negative user reviews for each model. Our review presents only fairly affordable tools that will be affordable for most users. Now you can begin to consider each drill individually.
Best of cheap
3. Makita HR2440
Despite the low cost, this model proved to be excellent at home. This device comes with a convenient case with locks, in which the tool is convenient to store and transport. The model works quite quietly and evenly, during the operation no sharp jerks or twitches were noticed. With prolonged use, the engine does not heat up at all. If a pebble is caught in the concrete structure, it passes it easily and without interference, without creating additional vibration.
A depth gauge and an additional handle are also supplied with the hammer drill. This will be enough for ease of use. Thanks to the ability to adjust the speed and switchable impact, the device acquires additional functionality. In particular, it can be used as a drill or screwdriver. Ergonomics of the model at a height, all buttons, including reverse rotation, are available. There are three operating modes in total: hammer drilling, drilling and chiselling with torque function.
Benefits:
- Excellent build quality: the case is made of plastic, all its elements are tightly fitted to each other;
- Very convenient location of all device controls;
- The engine is quite reliable, capable of operating normally for a long time without overheating.
Disadvantages:
- Compared with domestic similar products is much more expensive.
2. Interskol P-22 / 620Er
This tool is characterized by a rather long warranty period, which is as much as three years. Together with the model comes a plastic suitcase for storage, it provides a niche for the tool itself, power cable, connectors for drills and drills. They do not come in the kit, you have to purchase them yourself. Together with the device comes a handle and depth gauge. The mass of the device is not too significant - only about 3 kg. The appearance is standard, there is nothing remarkable in it, moreover, this is not necessary during operation.
The length of the power cable is more than 2 meters - very convenient, you do not always have to use an extension cord. The equipment has two operating modes - drilling and drilling. The number of revolutions is 1100 per minute, the number of strokes is about 5060 per minute. The switch between operating modes is located on the side of the product. The adjustment of the number of revolutions and the lock of the start button in the on state are located directly on it. The design has a special fuse clutch that will turn off the power in case the device jams. This will not allow the tool to break down too quickly and protect against injuries. All handles are rubberized, do not slip in the palms and very comfortable fit in them. If desired, you can install another chuck necessary for the use of drills.
Benefits:
- It can be used even for professional work;
- The increased cord length;
- Ease of use, in particular, the replacement of the cartridge is made in one easy motion;
- Long term warranty service.
Disadvantages:
- At first it produces an unpleasant odor, but over time it gradually disappears.
1. Bosch PBH 2900 FRE
This is the best device among the low-cost punchers of this year, it is capable of performing a number of operations. To do this, it has a modern electronic filling, and the workmanship and all the operational properties fully comply with the latest European standards. The mass of the device is only 3 kg, the tool is equipped with a wide handle, thanks to which you can perform all the necessary work without applying extra effort. The power of the product is 730 watts, which ensures an increased frequency of strokes - up to 4 thousand per minute. The maximum rotation speed without load is 1450 rpm. A pneumatic type impact mechanism is installed in the design, due to which the force of one blow is brought up to 2.7 J. Several drill bits are included with the device, due to which it is easy to make holes in steel, concrete, wood. The largest diameters in this case are 13, 26 and 30 mm, respectively. In addition, there are several crowns in the kit, allowing you to make holes in the brick with a maximum diameter of 68 mm. The vibration produced by the product is minimal, therefore it can be operated for a long time, fatigue will not occur in the hands. Another important quality is the presence of a keyless chuck.
This household tool can easily replace even a professional product. It is not too noisy - only 100 dB at maximum loads. He has a long warranty period of 2 years. The power button is equipped with a special lock, and a depth gauge for drilling is supplied with the product. The length of the power cable is only one and a half meters, so in most cases you will have to use an extension cord.
Benefits:
- Low weight of the device;
- Advanced equipment;
- The ability to adjust the speed;
- High-quality assembly of the model;
- Safety clutch provided.
Disadvantages:
- Short cord.
The best punchers of the year in terms of price and quality
4. DeWALT D25124K
This model is characterized by the presence of three modes of operation, so the possibilities of its use are many. It is excellently suited both for chiselling and for ordinary or hammer drilling. The manufacturer additionally developed a dust removal system that will not allow clogging of the operator’s eyes, regardless of the operating mode used. The number of revolutions is regulated by means of an electronic system, so that it will be possible to work very accurately even with soft and fragile materials - wood or ceramics.
To switch from one material to another as quickly as possible, you can use the SDS-Plus keyless chuck. With it, the snap changes in just a few seconds. If necessary, this hammer drill can also be used to tighten screws or self-tapping screws. A cam-type cartridge is supplied, where you can install equipment with a diameter of up to 13 mm. In addition, in the kit you can find an additional lateral thrust handle and a drilling depth adjuster.
Benefits:
- Perfect for making holes in any materials;
- Perfectly shows itself at home;
- Ergonomic handle and low weight allows you to use the tool for a long time without interruption.
Disadvantages:
- Weak plastic case, it also does not provide mounting for various paraphernalia.
3. Makita HR2470
This model is a design that works in one of three modes. The position of the power plant is horizontal. In addition, this tool is determined by uniform torque in both forward and reverse rotation.This possibility of the device is quite rare, but the tool can easily cope with such loads. The brush organization system is also more modern, they can be replaced if necessary. The hammer drill has excellent performance. The developers have placed a durable firing pin, due to which it is possible to significantly extend the period of operation of the device.
As the main element of the equipment has a reliable engine that is not able to overheat for a sufficiently long time. The chuck has two metal protrusions so that the drill locations can be axially positioned. This greatly improves the accuracy and reliability of this tool. The keyless chuck, so if necessary, the drill or drill is removed within a few seconds. The power of the equipment is 780 W, in idle mode the number of revolutions reaches 1100 per minute, the highest impact force is 2.7 J. The weight of the punch is only 2.6 kg, the handle is ergonomic, it can significantly reduce the vibration load on the hands.
Benefits:
- Powerful enough device;
- Ergonomically shaped handle;
- Reasonable cost;
- Ideal for homework.
Disadvantages:
- No drills or drills included.
2. Bosch GBH 2-26 DFR
This tool can be fully classified as professional, but it is great for home use. The design is distinguished by a standard set of components, which includes the main security system, several cartridges, clamps and various kinds of limiters. Users note the convenience of the handle, which will fit perfectly in the hand. The design has a special safety screw that provides the drilling process with the specified parameters, regardless of how much the user controls the tool. The SDS Plus cartridge allows you to change accessories quickly enough, without being distracted from work.
The design is characterized by a sufficiently high impact force, so the holes are optimal even with a rather long operation. The power of the product is 800 watts, the maximum shock frequency is 4000 per minute, the highest rotation speed is 900 revolutions per minute. Holes with a maximum diameter of 1.3 cm can be made in metal with this product, up to 2.6 cm in concrete, up to 3 cm in wood. In addition, it is allowed to install special crowns for all kinds of materials, the largest diameter is 6.8 see. The design is equipped with a rather long cable - 3.5 meters.
Benefits:
- A very reliable tool;
- It fits perfectly in the hand;
- High power level;
- Easy to use.
Disadvantages:
- Not found.
1. KRÜGER rotary hammer (Germany) 1400 W
The convenient and compact Kruger puncher with a case for carrying and storage is a device that is used to perform various tasks. With it, holes are made, tiles are removed, building and finishing materials, concrete.
In addition, a rubberized handle is supplied with the drill. It provides the greatest ease of use and reliable grip. In addition, the Kruger rock drill includes a depth gauge for even holes with the same diameter, an additional cartridge. The drill easily copes with various materials: metal, wood, concrete. Despite the high German quality, the price of the drill is quite affordable for consumers.
Benefits:
- Rich equipment;
- Warranty from the manufacturer 1 year;
- High power 1400 W;
- Reinforced housing made of impact resistant plastic;
- Long power cord for freedom of action.
Disadvantages:
- Not found.
Buy the best Kruger puncher (Kruger) 1400DFR here!
The best professional models
3. DeWALT D3561K
This model is one of the cheapest among professional punchers, so even many home craftsmen give it preference. The equipment can be used for a number of operations related to making holes.Each task has its own operating mode, and using this equipment is quite easy. The design is carefully thought out, all the main controls are in close proximity to the fingers. Ergonomics is excellent, the operator’s hands will not get tired for a long time. The number of revolutions, force and frequency of blows can be adjusted if necessary. The power of the equipment is as much as 1050 watts, which allows for quickly making holes of the required diameter.
The drill has an SDS-Max cartridge. All internal elements of the tool are protected from dust with a very high-quality sealing system. In the kit you can also find a multi-position handle - it provides high ease of use. Replacing the tool is done in a short time.
Benefits:
- Highest build quality
- Reasonable cost;
- Not very large overall dimensions;
- Low vibration.
Disadvantages:
- Too compact case - besides the punch itself, the power wires and the handle, nothing can be placed.
2. Metabo KHE 96
This model is considered to be one of the most popular among professional punchers of 2019. Two additional handles are supplied with this device - keeping the device even more convenient. The tool is perfect for even the most complex models. The handle, if necessary, can be placed in one of three points on the housing. It is slightly curved, if necessary, can rotate 360 degrees, you can also slightly change the angle of its inclination, so that the instrument is as convenient as possible to hold in your hands. The model is equipped with a soft start system that does not allow the sudden occurrence of vibrations. In general, users in their reviews note that the degree of vibration is quite low. This protects the joints during prolonged use. The handles themselves are designed so that vibration is as small as possible.
The shape of the tool is somewhat elongated, due to which the level of accuracy of the work is increased, the load on the back is greatly reduced if the work needs to be done in the floor area. The adjustment is made quite quickly - for this a special rotary speed controller is provided: it allows you to quickly change the number of revolutions depending on what material you have to deal with. A special safety clutch is provided in the design, which will protect the equipment if the drill sticks in the thickness of the material. The bit can be fixed in one of 16 positions. Carbon brushes, if necessary, turn off.
Benefits:
- Very convenient anti-vibration system;
- Not too heavy construction;
- The ability to quickly adjust the number of revolutions;
- There is a safety clutch that prevents the motor from failing in case of jamming of the drill or drill.
Disadvantages:
- Small holes should be drilled as carefully as possible.
1. Makita HR5211C
This is one of the most powerful models among all professional devices that can be found today on sale. The tool is cast with a rather large mass - it weighs 11 kg, it may not be very convenient to hold it in hands, however, it easily punches holes even in reinforced concrete with holes up to 50 mm in diameter. The punch punching holes pretty quickly. An anti-vibration pad is located on the rear handle - this allows you to easily hold the tool in your hands, even if the drill sticks in the material. The warranty is quite long - 2 years. The motor brushes are very reliable, do not wear out over time.They are arranged simply, therefore, if necessary, they can be replaced independently without the help of specialists. The manufacturer produces all spare parts for this tool, so finding them on sale is quite simple.
The equipment is characterized by a power of 1500 W - the highest indicator in our review of the best perforators. With it, you can make holes in the concrete with a diameter of up to 160 mm with a crown - more than enough to install glasses under sockets and switches. The maximum force of one blow is 20 J, the length of the supply wire is 5 meters, it is unlikely to have to use an extension cord.
Benefits:
- High-quality assembly;
- Reliable vibration protection system;
- At idle no blows;
- High power.
Disadvantages:
- Except for high mass not detected.
In conclusion, an interesting video
Our review of the best rotary hammers of 2019 is complete. In conclusion, we want to express the wish that the rating turned out to be quite useful for you. If you still have any questions regarding the models included in the review, then you can ask them in the comments to this article.
(3 ratings, average: 5,00 out of 5)
Loading...
