Parktronic is a rather useful accessory for car enthusiasts, however, fully experienced drivers who regularly have to park their vehicle in low light conditions can fully appreciate all the advantages of this device. In automotive stores, you can find a fairly large number of such products - they differ from each other by the principle of installation, the way data is displayed and by a number of other parameters.
In our today's ranking of the best parking sensors in 2019, we will not only consider the useful characteristics of the selected models, but also analyze the factors that directly affect the choice of such products. This will help our readers to purchase the best product that can greatly facilitate parking and will last for many years.
Summary of the rating:
How to choose parking sensors?
In this equipment, you can find a large number of various ultrasonic sensors, which are located in both the front and rear bumpers. In addition, a special electronic unit is provided in which the processing of the received data regarding the presence of obstacles in the way of the car is carried out. Another element is an indicator device, which is an LED or liquid crystal display. Instead, in the cheapest models there is a sound warning system, thanks to which the driver immediately learns about the presence of obstacles and is able to quickly stop.
Most of these devices have similar equipment. In stores you can find both traditional mortise sensors and tape, which are installed directly on the bumper. One of the most important factors when choosing such products is sensitivity. The higher this indicator is, the greater the efficiency of the device becomes, which allows you to determine the distance between the obstacle and the bumper with an accuracy of a millimeter.
It is also advisable to pay attention to the total number of sensors supplied with the parking sensors themselves. Usually they are from two to eight. As experienced drivers recommend, it is best to give preference to models equipped with as many of these devices as possible, as this helps to significantly increase product performance, therefore, the likelihood of a collision becomes much lower.
An important point is the installation method on the car body. In this regard, you can give preference to overhead or tape devices, since they do not affect the efficiency of the product, but the vehicle body will remain intact. It is very convenient if the parking sensors are equipped with a display on which data regarding the remaining distance to the obstacle will be displayed. Ideally, you can buy a model with a built-in camera that will show the picture in real time - the user will be able to independently evaluate how much free space is left.When buying parking sensors, you will have to take into account climatic conditions - the level of dust, dirt, humidity. Optimum will be products that are reliably protected from various external factors.
When choosing models for inclusion in our rating, we took into account all the points that were discussed above. In addition to them, the feedback of experienced users and the price-quality ratio of products were taken into account. We hope that after a careful study of our review, you will be able to decide on the purchase of the most suitable products.
Models with multi-segment linear indicators
4. BlackView PS-4.1
A fairly simple product, which is characterized by small dimensions of the presented sensors, all of which are mortise. In order to correctly install them on the car body, there is a corresponding instruction and a special drill that exactly matches the diameter of the sensors themselves. It is well sharpened, so it is good to cope with both plastic and aluminum or with galvanized steel. For reliable protection of the vehicle body from the occurrence of corrosion processes, there are special rubber rings that also additionally seal the installation site of the sensors - they will not begin to dangle even after driving on a bad road. The wires going from the sensors to the information processing unit are removed into the corrugation, which will have to be purchased separately.
The display, where the basic information regarding the location of obstacles will be displayed, is made in the form of a multi-segment linear scale, in the central part of which you can find a digital indicator. The sensitivity of all available sensors is very high. According to manufacturers, obstacles are detected at a distance of 0.1 to 2.5 meters. In total, three modifications of these products are presented on the market, which differ from each other in the appearance of the display, as well as in the overall dimensions of the sensors.
Benefits:
- Sensors are able to detect obstacles in a fairly wide space;
- You can choose the model that is most suitable for the interior design of the car;
- Sound notification is configured if necessary.
Disadvantages:
- Protects only the rear bumper from damage;
- The driver still has to be somewhat distracted.
3. SPARK 4 BIZON
The first model of domestic manufacture included in this review. It is equipped with a special LED indicator that can be installed directly in the vehicle interior. However, according to manufacturers and users confirm, this design can be placed in almost any arbitrary place of the machine due to the presence of an original function that allows you to program the display. The kit comes with metal staples made of stainless steel. The overall dimensions of the indicator are 120x55x25 mm. Together with the data processing unit four sensors are delivered at once. The sensors are mortise, but during installation they do not create any difficulties. All the necessary information is brought to the driver through the LED three-color display, which displays data relating to the indication of distance and direction to obstacles.
The display can be placed on the dashboard, above the rearview mirror. This device has an interesting Blind Zone blind spot monitoring feature. She will detect obstacles hidden from the driver's view. This moment will be very useful not only in the parking process, but also during movement. With its help, you can timely detect interference when changing to an adjacent line. Parktronic has a training mode that provides system tuning in a fairly wide range.
Benefits:
- Able to work in dead zones;
- It is made in several color options;
- The kit comes with sensors whose radiation pattern is different;
- Indication modes can be adjusted according to your own needs.
Disadvantages:
- When working in dead zones, there is no sound indication.
2. SteelMate PTS410M8
Thanks to this model, the driver of the vehicle will receive timely information about the approaching obstacle and the exact distance that is left to it. This product has been manufactured by a Chinese corporation, which has been in the automotive accessories market for over 20 years. Products are characterized by an elongated display, all information is read quite quickly - you do not have to be distracted from the road or the parking process to get the necessary information. If you wish, you can install the product directly on the ceiling of the car, and the indication will automatically turn over. Some users do not think it is too convenient that the case closes the display, and special windows are cut for all indicators. The front panel, if necessary, can be changed depending on the style of interior design.
All sensors are mounted on the rear bumper and installed on it not by means of classic spring latches, but thanks to the rubber dampers. If desired, the driver can use special compensation rings. With their help, even on an inclined bumper, the sensors will be located in a horizontal plane. They come with the device. Sockets for connecting sensors are equipped with a thread with careful sealing, which allows you to carefully prevent the ingress of dust and moisture under their body.
Benefits:
- Superior workmanship and assembly;
- The panel is available in several color options;
- If desired, the device is mounted on the ceiling of the car;
- Reasonable cost.
Disadvantages:
- You will have to tinker a bit for the correct installation of the sensors.
1. AAALINE LED-14 inside
Many motorists are confused when installing parking sensors the need to drill a bumper. If the vehicle is painted in some non-standard color, then there will certainly be a need to either come to terms with the circles of sensors that will catch the eye, or paint over them with specialists. In the manufacture of these products involved the original technology, which involves the internal installation of sensors. At the same time, placing them is quite simple - they will not snap into the drilled holes, they will need to be screwed into the thread of a special platform, which is installed on a double-sided tape under the bumper. Outside, nothing will be noticeable. All sensors have a sensitivity adjustment function.
Largely due to this design solution, the sensors will not be damaged even during high pressure washing. Even with a strong blow, the adhesive tape simply comes off the bumper, keeping the device in good condition. However, it is necessary to install these products without removing the bumper, which can cause certain inconvenience during installation. In addition, its inner surface will have to be washed and degreased. Otherwise, the tape will not hold too reliably.
Benefits:
- Sensors are installed hidden, there is no need to drill a bumper or car body;
- The sensitivity of each of them can be adjusted depending on the needs;
- Compact overall dimensions of the display;
- Sensors can be placed both in front and behind the car.
Disadvantages:
- When installing, there are certain difficulties.
Devices equipped with a graphic display
3. ParkCity Kiev 818 / 302L
In the kit of this parking sensor, you can immediately find eight fairly sensitive sensors, a display, a unit that processes the incoming signal. In addition, there is a complete set of wires for connecting all elements, as well as all the necessary details for a full installation of the device. The minimum measurement accuracy is 10 cm - this parameter is quite enough for the timely detection of both small and fairly large obstacles. All wires are equipped with a double system of soft insulation, which will not stiffen even under the influence of low temperatures.The alert volume can be adjusted according to the needs of the motorist. The display is quite informative, bright - all data is read very quickly, the driver will not have to be distracted from the traffic situation. Parktronic each time it is turned on, it automatically diagnoses the status of all elements.
These products are capable of operating in the temperature range from -40 to +80 degrees. The display module is equipped with a universal mount, so it can be installed, for example, on the dashboard or on the windshield, say, in the area of the rear-view mirror. The location of the obstacle relative to the vehicle in space is displayed. There are several operating modes - exclusively visual, with voice messages or equipped with an audible alarm.
Benefits:
- There is a voice notification of obstacles;
- The device performs a self-test every time it is turned on;
- Sensors can be selected depending on the color of the bumper.
Disadvantages:
- The minimum obstacle detection distance is only 10 cm.
2. Parkmaster 27-8-A
The latest parking assistance system for both the front and rear bumpers. The design is equipped with a system of eight sensors, four of which are located in front, the same number in the back. These products are able not only to provide maximum assistance in the process of parking a vehicle, but also to carry out various kinds of maneuvers in cramped urban conditions, as well as with a lack of visibility in bad weather. It also provides special supersonic sensors that can detect obstacles in the way of the vehicle if they are located in blind areas. The distance to the obstacle is calculated automatically. The device is capable of stably functioning in a wide temperature range.
The display here is flat, liquid crystal type, equipped with a bluish backlight, which is not very striking, so it will not distract the driver from the traffic situation. The edging of the edges of the display is made of high quality aluminum. Such an appearance is perfect for almost any vehicle interior. The indicators located on the rear bumper turn on immediately after activating the reverse gear. Obstacles are detected from a maximum distance of 2.5 meters. A voice alert is provided that will tell the driver about the remaining space before the obstacle. The indicator is located in any place convenient for the user - on the windshield, dashboard or on the dashboard.
Benefits:
- Excellent information content;
- Products are ideally combined with sensors of internal installation;
- High-quality aluminum housing informative liquid crystal display;
- There are many color options for sensors.
Disadvantages:
- It will take a long time to configure.
1. AAALINE LCD-18 inside
One of the most advanced systems in our review. This model is equipped with eight sensors not of infrared, but of ultrasonic type, which are intended for internal installation under the front and rear bumpers. The Parktronic comes with an LCD display, which displays information about each sensor, as well as information about an approaching obstacle. It has a special rubber button that disables the front sensors, it also has everything you need to adjust the sound alerts. The functional of the model has the ability to select the response distance of all available sensors, their angle of inclination is also electronically controlled. Front sensors will also transmit information to the control unit when reversing.
All external elements are painted black, placed in a dustproof and waterproof housing. Voice guidance and the interface are completely Russified, and the language can be changed.A digital indication to the obstacle is provided here. The kit comes with an adapter for installing the display directly on the windshield. The brightness of the display can be adjusted in both manual and automatic mode. The response distance by the sensor is also set by the user himself, the sensitivity changes smoothly. The sensors have an original design, thanks to them the original appearance of the bumper is preserved. O-rings are made from quality silicone.
Benefits:
- Advanced functionality that allows you to manage all the features of the parking sensors yourself;
- Alert adjustment is configured by the user;
- All sensors are placed under the bumper, which does not spoil its appearance.
Disadvantages:
- To place the sensors will have to make a decent amount of effort.
Built in mirror or with rear view camera
3. Incar PT-1044B
These products will be optimal for vehicles that are not equipped with a multimedia screen so that you can install a rear view camera. Using this model, it will be possible to keep the vehicle trajectory under complete control, and such a solution will be very budgetary. Parktronic has not a simple segmented-type screen, but a full-fledged display, whose diagonal is 4.3 inches. In general, the indicator is not too large, but it is quite enough for a comfortable parking with a lack of natural light. It will fit well into the interior of the dashboard, takes up a minimum amount of free space. If necessary, you can connect not only a rear view camera, but also a front camera.
Directly above the display, you can also find a standard display system that displays an approach to an obstacle. It is represented by LEDs showing segments and numbers. This product is fully compatible with any rear view cameras, regardless of their type.
Benefits:
- The ideal solution for installation in a car without a multimedia display;
- If there is no need to use this gadget, the display has a special folding mechanism;
- The product is characterized by advanced and universal functionality.
Disadvantages:
- Sensors have medium sensitivity, but this disadvantage is easily compensated by the presence of a rear view camera.
2. SPARK 6M
Parktronic is available immediately in 12 different colors, so you can choose the optimal product that will perfectly match the color of the car itself. If desired, the user can purchase additional sensors. All of their connectors, as well as the sensors themselves, are placed in sealed enclosures, so they will feel great even in aggressive road conditions. The wires intended for connection to the control unit are quite long, so this model is perfect even for very large machines. The instruction is fully Russified, and translated in a high-quality and presented in a clear language. Parktronic itself has three operating modes - forward, backward and stop. This allows not only to significantly ensure the safety of the vehicle when parking in reverse, but also to calculate the distance to the nearest cars in traffic.
The delay in transmitting information is only 0.25 seconds. The indicators are customizable, the system itself performs its own diagnostics. The operating modes of the indicators change, ignoring the turnbuckle, spare wheel is turned on. Corner sensors perfectly catch obstacles.The indicator is fixed on the driver panel; it is a luminescent graphic type. All information is understandable. The indicator itself turns on when reverse gear is engaged.
Benefits:
- The system responds quickly enough;
- All parts that extend beyond the vehicle are taken into account when the sensors are used;
- The minimum distance is 16 cm.
Disadvantages:
- Voice notification is not provided;
- Relatively expensive products.
1. ParkMaster 22-4-A
The display is built into the rearview mirror, so this parking sensors will absolutely not occupy free space on the driver’s panel of the car. All sensors are compatible with sensors, they can even be placed inside the bumper, made in the AX format. The new mirror does not replace the old, but is superimposed directly on top of it. In the inactive mode, the liquid crystal display located in the center does not catch the eye at all, and after switching on it will be no worse than the designs equipped with the remote display. Multichannel warning system - sound, light and voice information. Such a gadget will be very useful when parking in the dark or in adverse weather conditions. All components are very high quality, able to maintain their performance in the temperature range from -40 to +80 degrees.
If necessary, the user can change the sound volume, adjust the sensitivity of the sensors, as well as set the optimal definition of the distance to react to an obstacle. All sensors go through a self-test procedure when the product is turned on. They turn on when switching to backward movement. If a malfunction was detected during the diagnostic process, the user will be immediately notified. The sensors are equipped with the latest piezoelectric elements. If necessary, they can be placed in the metal frame of the license plate holder. They have a tilt angle adjustment system. The diameter of the landing hole is 19 mm. All sensors are carefully waterproofed, they are able to withstand immersion in water to a depth of one meter - this moment is very useful when driving through deep puddles.
Benefits:
- Very informative display;
- You can optionally connect sensors hidden installation;
- Universality of installation;
- The user is able to independently set all the parameters he needs.
Disadvantages:
- It will not work to adjust the brightness;
- Not very high quality mirror itself.
In conclusion, a useful video
So our review of the best parking sensors has been completed. I want to believe that the information we collect will be more than enough so that you can purchase the most suitable products for yourself. If you still have some questions about your favorite devices, feel free to ask us in the comments to this article. We will promptly respond to every comment and try to collect additional information, setting them out for our readers in the most accessible form.
(2 ratings, average: 5,00 out of 5, you have already rated)
Loading...
