Modern technological construction work can hardly be imagined without the use of various mixtures, for example, concrete, lime mortars, plasters. They contain a huge number of components that should be thoroughly mixed during the manufacturing process, and before direct use. Unfortunately, many people still prefer manual mixing, however, construction mixers have been on sale for a long time, allowing you to quickly, efficiently and without physical costs to get a quality mix.
A fairly wide range of such tools is presented in stores, so choosing the optimal product is not as easy as it might seem at first glance. To ease this problem for you, we decided to make a rating of the best construction mixers of 2019, which can only be found on the Russian market. Before you start analyzing specific models, let's figure out what you should pay attention to when buying this product.
Summary of the rating:
How to choose a construction mixer?
Despite the fact that manual devices are still on sale, they are gradually becoming a thing of the past, and they are being replaced by electric models that are equipped with various nozzles depending on the density and type of mixture. The main indicator of the tool is the ability to mix a certain mass or volume of solution in one cycle. This parameter is directly affected by the power of the product, which is measured in kilowatts. For home use there are household tools, their power in most cases does not exceed 1 kW. For use in industrial construction, devices with a capacity of 2 kW and above will be most suitable. Such products easily work even with significant masses of high-density concrete - up to 200 liters of the finished mixture can be obtained in one batch.
Be sure to pay attention to the mass of the product, since in any case it will have to be held by hands. The minimum weight is 2 kg, semi-professional structures will have a mass of about 7-10 kg, and already products belonging to the professional series will be even heavier - 10-15 kg. It is desirable that the products be equipped with an engine speed control system. This feature allows you to maintain a constant mode of operation, regardless of the density of the mixture.
Equipment torque indicates which internal forces are generated directly in the mixed solution. The higher this factor is, the more dense the mixture will be able to process the selected tool. In the field of domestic use, it will be possible to prepare a plaster mortar, stir the paint, get a high-quality putty mixture, a primer and other compositions that differ in medium or low density.
It is important to pay attention to the number of revolutions of the device. Regardless of the destination, this figure fluctuates around 750-850 revolutions per minute. This will be quite enough to work with solutions of various densities. It is desirable that the products are equipped with a soft start system.This technology allows you to prevent the mixture from splashing at startup, reduces peak loads during startup, which greatly prolongs the life of the tool.
When choosing models for inclusion in our rating, we took into account all the points discussed earlier, and also took into account the ratio of price and quality of products, and also looked at user reviews. We tried to include not too expensive devices in the review, so that they would be affordable for most of our readers. Now is the time to go on to analyze the specific characteristics of certain models.
Top 10 models of construction mixers
10. STANLEY SDR1400
If you pay attention to the appearance, then this device can hardly be attributed to semi-professional or professional equipment. Products have small overall dimensions, placed in a bright case. All faces here are rounded, the shape of the handles is ergonomic, all the control buttons are located so that the user can reach them even during the most complex operations. Performance is also quite decent - as noted by users, this tool has decent reliability. The mass of the product is only 3.5 kg, and the electric motor provides a torque of 80 Nm. The number of revolutions, if necessary, is adjustable in the range from 400 to 800 per minute. Like most models included in our rating, there is a smooth start system that reliably protects the engine from overload during peak impacts.
The maximum engine power is 1.5 kW, even with a multi-hour cycle of mixing the building mixture, the device will not overheat. The largest diameter of the mixer can reach 140 mm. This allows the use of these products in both individual and multi-unit construction.
Benefits:
- Pretty high-quality assembly;
- Decent power level;
- The presence of a soft start system.
Disadvantages:
- When working, it makes a lot of noise.
9. ELITECH MC 1600 / 2ED
This is a flagship model from a domestic manufacturer. It is equipped with an electric motor, the power of which is 1.6 kW, it has two spindles. The rotation speed of each of them can reach about 800 revolutions per minute. The gearbox has a housing made of sheet steel, which allows efficient removal of excess heat. The nozzles here are of increased strength, they have a spraying of zinc. Unlike most devices on the market, there is no threaded fastening of the corollas. Instead, a special quick-clamping type chuck is installed here, which allows you to save a lot of time when changing nozzles, besides, to work with it there is no need to use all kinds of keys for tightening.
The productivity of the device is quite high, with its help you can work with such mixtures as concrete, plaster, glue, paint and various other construction and finishing materials. The speed of revolutions is maintained at the same level here, regardless of the density and viscosity of the mixture. The gearbox is two-speed here, which ensures efficient operation both at low and very high speeds. The products have overall dimensions of 669x268x368 mm and weighs 8 kg. If necessary, the engine brushes change very quickly, for this you do not have to have any special skills.
Benefits:
- Not too large mass and overall dimensions for professional equipment;
- High power;
- The presence of a two-speed gearbox;
- Nozzles change within seconds;
- Ability to work with mixtures of various density and viscosity;
- It is very convenient to hold in hands during use.
Disadvantages:
- At first, the smell of plastic is present, but later it disappears;
- Decently makes noise.
8.Caliber ERMD-1600 / 2E
The products are placed in a plastic case, equipped with two fairly comfortable handles, which are also made of plastic. The ergonomics of the case are carefully thought out, the assembly is of high quality, no backlashes and extraneous creaks were found during the testing of the equipment. On the right handle are all the basic controls of the device: a rotating wheel that allows you to adjust the number of revolutions, choose the optimal indicator, thanks to which the mixture will not be sprayed, but will be mixed as thoroughly as possible. There is also a trigger that starts the electric motor, and a button that locks it in the pressed position. On the front is a button responsible for a smooth start. A double-helix nozzle is supplied with this product, which is perfect for absolutely any job. Its length is about 55 cm with a ring diameter of 12 cm, which allows it to be used for mixing even heavy and dense concrete. It is screwed into the spindle of the device using special keys that are supplied with the mixer.
The length of the power cord is not very long - about 2 meters, so you will have to use extension cords. The mixing process is confident even at significant speeds. The power of the equipment is 1100 watts. Side handles have an ergonomic shape, comfortably fit in your hands. All controls are on the right handle. The finished solution can be obtained approximately three to five minutes after the start of mixing.
Benefits:
- Quite a serious power unit;
- The optimum ratio of price and quality;
- High build quality;
- Nozzle supplied.
Disadvantages:
- The nozzle has to be tightened with keys, so the process of installing it takes a decent amount of time.
7. BISON MR-1050-1
It has small overall dimensions and is characterized by high ease of use. Using it, you can get a completely ready mixture quickly enough. A robust nozzle with a fairly large grip is included with the product, which ensures good mixing quality. Its service life is long, and it will retain its original shape even when working with heavy and viscous mortars, including frost-resistant concrete. The functionality of the device is not too big - there is only one additional handle that provides switching speeds and the button itself, which includes an electric motor. The gearbox of the product is placed in a metal case, so even with peak loads it will not heat up much. This mixer can mix both dry and liquid mixtures. He is able to work with paints, plasters of different nature, adhesives (tiled or wallpaper), concrete.
The torque is quite high, so the product is able to quickly prepare a solution of any consistency and complexity. The handles have rubberized anti-slip pads that provide the most comfortable grip. Electronic speed control. It starts to mix smoothly, does not spray components. Nozzles are fixed using a special key. The design is carefully thought out, so that the load on the arms and back in the process becomes much less. Uncontrolled displacements of the device during testing were not detected.
Benefits:
- It is an adequate cost of production;
- High power rates;
- Decent build quality
- It is convenient enough to use;
- Long service life;
- The presence of anti-slip pads on the handles.
Disadvantages:
- Not too convenient mechanism for securing the nozzle.
6. Fiolent MD1-11E
Although this model belongs to the class of semi-professional tools, it is notable for its small overall dimensions and weight, but it has good power.Its weight is only 4.7 kg, so it is very easy to hold in your hands. The equipment is equipped with electronic speed control, and technology was also used in the manufacture to ensure that the tool is completely turned off if the engine brushes are completely worn out. The device is equipped with an M14 cartridge. The dimensions of the tool are 308x255x256 mm. The equipment was developed specifically for working with building mixtures of dry, soft or liquid consistency. The electric motor is placed in reliable insulation, and this also applies to the power cable, so the device is completely safe in terms of operation.
The gearbox housing is based on an aluminum alloy that removes heat as efficiently as possible. This allows you to significantly extend the period of operation of this equipment, which helps to use it even at decent loads. If necessary, it will be possible to purchase a rack so that the mixer is stationary - this will greatly increase the efficiency of its work when mixing dense solutions.
Benefits:
- Long period of operation;
- High power level;
- Very reliable equipment;
- In the process of use, it practically does not heat up;
- It makes little noise;
- Brushes wear out slowly;
- Decent build quality.
Disadvantages:
- There are times when the corolla is jammed.
5. Metabo RWE 1020
In the process of developing this model of construction mixer, the original Vario-Tacho-Constamatic technology was used, which is responsible for the speed control system. If a tool begins to have a significant physical load or it has to mix a sufficiently viscous or heavy solution, then this technology ensures the safety of the speed of rotation of the nozzle. This not only allows to achieve high efficiency of the device, but also protects all its systems from possible overheating. The power cable is brought out from the side of the case, which is also quite convenient. Such a solution protects it from breaking, tugging and rapid failure.
This device belongs to the professional class due to the presence of a huge number of additional trifles. First of all, there is an aluminum radiator of the cooling system that prevents overheating of the electric motor. The handle is not only as comfortable as possible, but also has an ergonomic shape, the corners are all rubberized. The housing is carefully protected from dust and other contaminants. The speed switch is very convenient and is always at hand. The warranty period is three years. As with most models in our review of the best construction mixers, there is a soft start system. The model is universal, so it can work with any bulk materials.
Benefits:
- When developing the model, the most advanced technologies were used;
- Long service life and warranty period;
- Very conveniently located handles with anti-slip rubberized pads.
Disadvantages:
- Heavy enough tool;
- Brushes will have to be changed quite often.
4. Makita UT1200
Users who prefer this company often say that this equipment is ideal for all its operational characteristics. The only exception is the cost of the device. However, this mixer is a happy exception to the rule. It will cost about the same price as its counterparts, but you will immediately feel the German workmanship and the Japanese approach to ergonomics and the development of this equipment. Despite the fact that the case is made of plastic, it will retain its original appearance throughout the entire period of operation. Handles are equipped with a non-slip coating. The device itself can work with solutions of any consistency. An exception to this rule is bitumen mastic.
The maximum motor power is 960 watts, a very reliable gearbox is provided, which allows a significant reduction in speed and energy transfer to the spindle with the highest torque of 25 Nm. At idle, the number of revolutions is 590 per minute, with heavy loads, the indicator decreases to 360 revolutions. This will be enough to prepare high-quality mixtures weighing up to 30 kg. Products belong to the semi-professional class, able to withstand decent loads.
Benefits:
- A large number of service centers;
- The optimal ratio of price, quality and durability for this equipment;
- It mixes almost all formulations well;
- It has carefully thought-out ergonomics.
Disadvantages:
- Nevertheless, the price is somewhat high.
3. Hitachi UM16VST
The three leaders in our review of the best construction mixers are opened by two-speed products developed by engineers from the world-famous construction equipment company. On the handle you can find a special swivel wheel that provides smooth adjustment of the number of revolutions. This prevents splashing of the cooking mixture. The handle responsible for changing speeds will not be able to switch when the engine is running, it will have to be stopped first. The device starts to work at minimum speed, and it will gradually accelerate. The engine is equipped with reliable brushes that excellently resist wear. They will be quite enough for active work for 5-6 years.
The electric motor has a power of one and a half kilowatts, however, on sale you can find a modification whose power will be slightly less - 1.1 kW. The first belongs to the semi-professional class, and the second belongs to the field of household tools. It is worth noting that each of these devices is equipped with a set of interchangeable brushes. The power cable is long enough, so you do not have to resort to using extension cords. It is expected that the handles have anti-slip pads, and the case itself is characterized by high build quality and a decent level of strength.
Benefits:
- A pretty decent level of power;
- There is both a step and a smooth system for adjusting speed;
- Decent length of the power cable.
Disadvantages:
- Somewhat heavy - with prolonged use, the lower back begins to get tired.
2. Hammer MXR1400
This model is a device equipped with two spindles, it can be used to work with materials of almost any density. Missing torque is observed on the handle. Thanks to this factor, the developers were able to reduce the level of vibration of the instrument, which, in turn, reduces the degree of stress on the hands, spine and lower back. In general, the power of this device is quite enough to work with a wide variety of building materials - concrete, paints, adhesives, plasters, varnishes and so on. This device is capable of processing up to 180 liters of a mixture at a time. When developing the mixer, the original technology of limiting the speed mode was used, due to which no spraying will be observed when immersed in the mixture.
The main working elements of this tool are made of high-quality metal, which is characterized by a high level of strength. The passive ventilation system reliably protects parts from possible overheating during operation, thanks to it it is possible to significantly extend the life of the product. The handle is rubberized, it will not slip even if the hands are in gloves.
Benefits:
- The unit is equipped with two reliable nozzles at once - their diameter is 120 mm with a length of 550 mm;
- Two work speeds are provided;
- Decent torque in the working part;
- There is an electronic speed limiter;
- High level of reliability;
- The switch is equipped with a high-quality lock;
- Rubberized grip.
Disadvantages:
- For a household tool, the cost is somewhat high.
1. Interskol KM-60 / 1000E
Finally we got to the leader of our review today. In the first place of the rating was the products of a well-known Russian manufacturer, which has a very reasonable price and high power level - this figure is about 1 kW. Torque in the engine area is reduced, and on the shaft increases to 53 Nm. This factor is quite enough to thoroughly mix about 60 liters of a building mixture of decent density. The unit does not withstand the maximum volume very easily, since it belongs, rather, to a household tool, however, it mixes 40 liters with ease. On the sides of the engine, you can find two plastic handles that are coated with a non-slip coating. On the right of them you can find the power button, equipped with a special lock.
In addition, there is a speed switch (there are only two), as well as electrical adjustment of the number of revolutions. The device operates from a standard power supply network with a voltage of 220 V and a frequency of 50 Hz. The case is made of reliable plastic that can easily withstand significant physical influences. The gearbox is made of metal, and periodically it will have to be lubricated. The length of the power cable is about 2 meters. On the case you can find special slots for the ventilation system. They effectively cool the engine, but at the same time absorb a decent amount of building dust, which from time to time will need to be cleaned from under the housing.
Benefits:
- Very convenient to use tool;
- High level of tool performance;
- Two nozzles are delivered at once;
- A decent level of power for household equipment;
- Small overall dimensions and light weight;
- Decent build quality.
Disadvantages:
- Slots in the ventilation system are not protected against ingress of building dust, so you will periodically have to disassemble the case and remove accumulated dirt.
In conclusion, a useful video
So we are close to completing our ranking of the best construction mixers. We hope you find it informative and useful enough. If you suddenly have any questions, feel free to ask us in the comments. We will try to quickly respond to your comment and collect additional information about the model you like in order to dispel all your doubts.
(1 ratings, average: 5,00 out of 5)
Loading...
